Lubricant Coatings

APPLICATION: Sandblast all parts with 120 grit aluminum oxide. DO NOT USE GLASSBEAD. Clean metal using conventional cleaning methods, with acetone, lacquer thinner, or other similar non-petroleum-based solvents. When the surface is clean and dry, apply a thin even layer of coating using an airbrush, detailed touch-up gun, or other spray equipment that allows for the application of a thin film of approximately .001″ to .0015″. Avoid excessive build-up of material as this can lead to loss of adhesion. DO NOT APPLY A SECOND COAT AFTER THE COATING DRIES. Allow to air dry and Cure at 300f for 1 hour. CLEAN UP: Clean equipment with water Non-Flammable READ DATA SHEET AND M.S.D.S. BEFORE USING
Example of how to apply DFL-1 (youtube video)