CermaKrome, Exhaust System Coating (MCX)

Exhaust System Coatings

CermaKrome, Exhaust System Coating (MCX)

$95.49$288.49

SKU: MCX Category:

Additional information

Weight 17 lbs
Dimensions 8 × 8 × 8 in
Size

Quart, Gallon

CURRENTLY, THERE IS A DELAY OF ABOUT TWO WEEKS FOR ALL CERMAKROME ORDERS. WE ARE SORRY FOR THIS DELAY AND APPRECIATE YOUR PATIENCE.

CermaKrome Exhaust Coating

  • Chrome-like finish after polishing
  • Thermal Barrier
  • Chemical & Extreme Corrosion Resistance
  • Substrate: +1300F; Environmental: up to 1600F
  • Full Cure: 500F for 1 hour

​​​​​​​Ready to spray no thinning needed (Can be thinned with distilled or deionized water) STIR AND SHAKE WELL BEFORE USE BEST TO MIX IN A BLENDER 1. ALL PARTS MUST BE ABSOLUTELY FREE OF ALL OILS, GREASE, MOISTURE, DUST, SCALE, OR CORROSION. SANDBLAST ALL PARTS. (120 GRIT ALUMINUM OXIDE OR SIMILAR) 2. Clean all parts using acetone, M.E.K., or similar material. DO NOT USE petroleum-based solvents. 3. Apply coating in light fog passes to achieve a thickness of .001″ to .0015″. Minimum part temperature should be 65f if below warm-up part. Spray all hard-to-reach areas first. 4. Inspect part for complete coverage. The part should be a light green color. 5. Immediately dry coating in an environment of from 100f to 150f. The part should change to a chalk white. 6. Bake part at a temperature of at least 500f. for one (1) hour. Time starts when a part reaches bake temperature. 7. If a second coat is desired, lightly Al. Oxide blast at 25/30 psi, re-spray, dry, and bake. 8. To polish either lightly blast with #12 glass bead, then polish with fine steel wool/polishing compound, or vibratory polish. Metallic Ceramic Coating. Polishes out To a Chrome-like Finish

âš  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Additional charges may apply for Hazardous Material