Specialty Coatings
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Sizes | Quart, Gallon |
Specialty Coatings
PRODUCT DESCRIPTION: Powder coating is a popular method of protecting and enhancing the appearance of a part. It is a very “Green” technology and the use of this technology is expanding. However, there are some applications where the use of Powder Coating is difficult if not impossible. It has a fair bond to metallic substrates, though the powder is easily damaged prior to baking. Powder Coating of non-metallic surfaces is extremely difficult. In addition complex shapes, deep depressions, voids or holes cannot be evenly coated. Generally, it is also not possible to multi-coat using traditional Powder Coating methods. This situation has been dramatically changed with the introduction of the LiquiPowder™ (L2O) technology by Tech Line. Now virtually any powder can be mixed into the LiquiPowder™ (L2O) carrier and sprayed as conventional water-based paint. The type of substrate is not an issue, multi coats, special effects, and a host of other custom treatments become available with the use of LiquiPowder™ (L2O). It is even possible to coat substrates that cannot handle the normal cure temperature but can handle the very low melt temperatures of most powders.
watch the youtube video, click here
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Additional charges may apply for Hazardous Material