Exhaust Coating, Cermablue (Gallon)

Ceramic Header Coating

Exhaust Coating, Cermablue (Gallon)

$95.95$297.95

Clear
SKU: MCBL Category: Tag:

Additional information

Weight N/A
Dimensions N/A
Sizes

Quart, Gallon

Ceramic Header Coating

 WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

DIRECTIONS
Ready to spray no thinning needed
(Can be thinned with water)
STIR AND SHAKE WELL BEFORE USE
BEST TO MIX IN A BLENDER

1. ALL PARTS MUST BE ABSOLUTELY FREE OF ALL OILS, GREASE, MOISTURE,
DUST, SCALE, OR CORROSION. SANDBLAST ALL PARTS. (120 GRIT ALUMINUM
OXIDE OR SIMILAR)
2. Clean all parts using acetone, M.E.K., or similar material. DO NOT USE petroleum
based solvents.
3. Apply coating in light fog passes to achieve a thickness of .001″ to .0015″. Minimum
part temperature should be 65f, if below warm-up part. Spray all hard-to-reach areas first.
4. Inspect part for complete coverage. The part should be a light green color.
5. Immediately dry coating in an environment of from 100f to 150f. The part should change to
a chalk white.
6. Bake part at a temperature of at least 500f. for one (1) hour. Time starts when a part reaches
bake temperature.
7. If a second coat is desired, lightly Al. Oxide blast at 25/30 psi, re-spray, dry, and bake.
8. To polish either lightly blast with #12 glass bead, then polish with fine steel wool/polishing
compound, or vibratory polish.

DANGER: Contains aluminum powder and phosphate/ chromic solution. Contact with
soaps or strong alkalis may produce hydrogen gas causing fire or explosion hazards.
DO NOT use water to extinguish the fire.

Danger: Do not breathe vapors or mists from spraying. Avoid
contact with skin and eyes. Use adequate ventilation to maintain
exposure levels below established exposure limits (see MSDS). If required
wear an appropriate NIOSH-approved respirator with a paint prefilter.

FIRST AID: Skin–Flush with water. Eyes–Flush with plenty of water. IF SWALLOWED–
Drink plenty of water and milk of magnesia and GET MEDICAL ATTENTION.